Home 
WAREMA Awnings Conservatory Awnings
WAREMA Awnings Conservatory Awnings
Conservatory Awning Downloads
WAREMA Acrylic Fabrics
Conservatory Awnings
WAREMA's W5 conservatory awning extends to cover the glass roof then curves around to follow the glass exterior walls providing additional shading. The curve can turn in a single radius or multiple radii to allow custom fitting in most situations. It features a slimline cassette profile that integrates inconspicuously into the roofline. The fabric is drawn with a pair of toothed belts concealed in the guiderails. This operating principle ensures that the awning always draws square, accurately and smoothly.
WAREMA's H3 and H4 pleated fabric, horizontal, retractable conservatory awnings are designed to be used under large glazed structures or atria where sun shading is required. The pleated fabric is pulled out and drawn back by means of transverse aluminium carrier bars. Supported on each side by either stainless cable or slim extruded aluminium rails these pleated retractable awnings use Soltis 92 fabric as standard with specialised fabrics available on application. The awnings can be inclined up to 5° when opening from bottom to top.
WAREMA's H1 and H2 horizontal, retractable conservatory awnings are ideal to use under large area glazed structures or atria where sun shading is required. Supported by either stainless cable or slim extruded aluminium rails these constant tension, under glass roof awnings use Soltis 92 fabric as standard with specialised fabrics available on application. The awnings can be inclined up to 15° or declined down to 30° as required.
Conservatory awning type D2 completes the picture for multifaceted glazed hip roofs. The operating principle ensures that the awning always draws square, accurately and smoothly. Rectangular awnings Types W8 and W6 are partner products utilizing the same cassette profile.
W7 features a cantilevered design that allows the awning to visually float above it's supporting structure. This innovative concept gives freedom to the designer and allows the awning to adapt to a myriad of roof types where side guided awnings would not be possible. The fabric is drawn with a pair of toothed belts concealed in the guiderails. This operating principle ensures that the awning always draws square, accurately and smoothly. Optimal fabric tension is always maintained with this unique operating concept.
W10 is a large capacity awning with a difference. Warema's unique side tensioning system maintains fabric tension in both directions and conceals the light gap that is normally seen between fabric and guiderail. The fabric is drawn and extended with a unique spring steel slat concealed in the guiderails. This operating principle ensures that the awning always draws square, accurately and smoothly. Triangular awnings Type D1 & D2 are partner products utilizing the same cassette profile. This family of awnings can be combined to treat complex glazed hipped roof structures.
W8 is our large capacity awning suitable for widths or projections of up to 6 metres. The fabric is drawn with a pair of toothed belts concealed in the guiderails. This operating principle ensures that the awning always draws square, accurately and smoothly. Optimal fabric tension is always maintained with a unique operating concept. Triangular awnings Type D1 & D2 are partner products utilizing the same cassette profile. This family of awnings can be combined to treat complex glazed hipped roof structures.
External sun shading with minimal visibility the W6 features a slimline cassette profile that integrates inconspicuously into the roofline. The fabric is drawn with a pair of toothed belts concealed in the guiderails. This operating principle ensures that the awning always draws square, accurately and smoothly. Optimal fabric tension is always maintained with a unique operating concept.