Call Melbourne: +61 3 9558 3009 or Sydney +61 2 9136 6090
Blindspace® is a unique solution to conceal any type of blind, in ceilings and skylights. Access is easy, with an integrated panel that simply clicks out and snaps shut leaving a discreet slot for blind movement. The unique Blindspace® design provides an elegant finished aesthetic and is easy to integrate, saving you time in both design and construction.
Architects can pre-plan in detail using Blindspace® drawings and technical specifications to provide their clients with a high level detailed interior concept or to future-proof residential and commercial buildings with recessed Blindspace® boxes.
Property Developers can future-proof buildings enabling home owners or tenants to install and replace concealed blinds of their choice to work with their home automation system.
Property Owners with built-in Blindspace® boxes prepared for electric blinds can have a fully designed and integrated solution for blinds of their choice, and choose to install one or multiple concealed blinds in any ceiling, gable or skylight.
Interior Designers can design windows with Blindspace® covers integrated with painted ceiling finishes.
Blindspace Concealed Blinds Brochure
Blindspace Installation Instructions
Blindspace S100x100 Technical Information
Blindspace S110x130 Technical Information
Blindspace C135x135 Technical Information
Blindspace S100 x 100 Technical Drawings for 43mm Standard roller blinds
Blindspace S110 x 130 Technical Drawings for 60mm Standard roller blinds
Blindspace C135X135 for 80mm standard roller blinds
Blindspace C180x100 opposing double for windows with double Medium Standard Roller Blind
Blindspace 118x190 opposing double for windows with double Medium Standard Roller Blind
Blindspace S100x100 Technical Specification
Blindspace S110x130 Technical Specification
Blindspace C135x135 Technical Specification
Blindspace S100x100 for 43mm internal roller blinds
Blindspace S110x130 for 60mm internal roller blinds
Blindspace C135X135 for 80mm internal roller blind
Blindspace C180X100 for double opposing 43mm standard internal roller blinds
Blindspace C118X190 Sliminline concealment for stacked double 43mm internal roller blind
Blindspace® is a unique solution to conceal any type of blind, in ceilings and skylights. Access is easy, with an integrated panel that clicks out and snaps shut leaving a discreet slot for blind movement. The unique Blindspace® design provides an elegant finished aesthetic and is easy to integrate, saving you time in both design and construction. To place an order, click here.
EARLY. Blindspace® needs to be considered as early in your project as possible to ensure a) you have enough time to work through the detail with your architect or builder, b) the necessary supporting structure can be incorporated into your design, and c) sufficient lead-time is available for ordering.
The choice of Blindspace® box comes down to two factors:
Blindspace® Box Types
There are three standard sizes of Blindspace® box for three different configurations of blinds:
Opening/recess size for installation
S100x100 (R, I, N or H)
(Standard 100mm by 100mm) for SINGLE standard medium sized roller blinds.
Available as variant R, I, N or H skim-coat flanges – see below
Click here to order.
103mm x 103mm
C118x190 (R, I, N or H)
For double blinds stacked vertically (Verosol Slimline Double Bracket shown)
w121mm x h193mm
C180x100 (R, I, N or H)
For double blinds side-by-side
w183mm x h103mm
Custom (R, I, N or H)
For large or special blinds
(made to order)
Contact us here.
Contact us to discuss your requirements
Each of the diagrams above depicts Blindspace® boxes with a skim-coat flange on BOTH sides. Blindspace boxes can be ordered with skim-coat flanges on both sides, one side only or no skim-coat flanges. In most cases people order with both skim-coat flanges, but there are numerous situations where only one side is desired e.g. Blindspace® box is to have one edge butt directly against a window frame on one side.
Skim-coat flange variants available (all models)
This letter refers to the required skim-coat flanges, e.g.S100x100R means “Standard”, 100mmx100mm, “Regular” (“R”) meaning both flangesEvery model of Blindspace® box is available in the following variants:
Blindspace® boxes are supplied in a white powdercoat finish including the removable flap. No other colours are available, HOWEVER, the underside of the removable flap may be painted to match the ceiling colour.
Click on the 'Order Now' button to place a order standardised lengths through our Blindspace store.
Please note when considering required lengths, End caps measure 2mm each so will add a total of 4mm to the final length.
If you require specific lengths then please contact us to put in a custom order.
Allow 2 weeks minimum for standard sized boxes and 3 weeks for custom boxes.
Shade Factor only sells Blindspace® in pre-cut lengths and does not offer an installation service. Installation is provided by your builder in accordance with our supplied general instructions.
We strongly recommend providing drawings (available on our website) to your architect so that they can incorporate Blindspace® in your project. Some builders may be willing to work with you to detail where Blindspace® boxes will go and how they will be installed. In general, each box should be detailed so that the fit is correct and sufficient supporting structure is allowed.
Installation is provided by your builder or suitably qualified carpenter in accordance with our supplied general instructions.
Blindspace® can be retro-fitted in many cases to existing buildings, but that will need to be discussed with your architect or builder. It can depend on how much space is available above the ceiling, whether the Blindspace® boxes will interfere with rafters, and a number of other factors. One method of retro-fitting is to build a small bulkhead below the existing plane of the ceiling specifically to house Blindspace® boxes (example photo below).
In general, 3mm needs to be added to the width and height of the Blindspace® box to calculate the finished dimensions of the required recess. This allows sufficient room to easily insert the box but not enough to allow the box to move once installed (noting that boxes are glued and screwed according to instructions)
(Standard 100mm by 100mm) for SINGLE standard medium sized roller blinds
For double blinds stacked vertically
In general, 3mm greater than the width and height of the specified outer dimensions of the Blindspace box
For mitered corners, it is important to allow extra length for the two Blindspace® boxes to be joined together.
The extra length required is equal to the width of the box. For example, an S100x100 box requires an extra 100mm allowance.
It is CRITICAL that the Blindspace flap is opened correctly to avoid the possibility of damaging the Blindspace box, flap or ceiling plaster. Flaps are NOT designed to be pulled down in one continuous length, from the centre OR in one movement. Instead, start at one end and work along the entire length of the flap, pulling down a bit at a time until the flap is open. Close using the same technique in reverse.
Blindspace® has very detailed installation instructions which must be read in full and carefully followed. Some of the important points are:
Blindspace® boxes must have enough height for the lowest point of the base-rail to retract inside the box when the blinds are raised. If Blindspace is to follow a sloped ceiling, there must be a) sufficient height above the ceiling to incorporate a tall enough Blindspace box, and b) the Blindspace® box itself must be taller than the difference in ceiling height at either end of the blind. In general this means that Blindspace® boxes are only suitable for ceilings with a small amount of rake. Gable ends are not possible based on the solutions currently available in Australia.
We would love to hear from you, ask us a question or request a quote.
Architectural plans or photos (e.g. an outdoor area) greatly assist us in understanding your needs. If you have these available, please upload them below.
Victoria 6 Plane Tree Avenue DINGLEY VIC 3172+61 3 9558 3009
New South Wales 7A Green Street BROOKVALE NSW 2100+61 2 9136 6090
Perth+61 8 6147 7492
Visit us on Youtube
Shade Factor are proud to be the exclusive agents of Warema Blinds and Automation systems in Australia and New Zealand